|
The BTS is an automatic battery discharge test set designed to enable
unattended discharge tests to be performed on standby batteries. It is widely
acknowledged that a capacity test as performed by a controlled constant current
discharge gives the best indication as to the health of a standby battery and
its ability to perform to its specification.
A test is performed by entering on a PC the discharge current, discharge time,
minimum allowable battery voltage and the voltage measurement record rate.
Optional alarm
settings can also be entered, the alarm outputs being connected into the local
alarm scheme to notify the operator if attendance is necessary. Once the test
has been initiated by the PC, the PC can be disconnected and the discharge
unit will perform the test with no operator involvement. As the battery voltage
falls during the discharge the unit adjusts the load on the battery such that
the discharge current is maintained constant. The discharge continues until the
time limit is reached or the battery voltage drops below that previously entered
as the minimum. The test set stores test results internally in non-volatile
memory and the PC can be reconnected later so results can be downloaded and
analysed.
Features
- Software
- Windows 3.11/95/98/NT
- Fully Automatic or Manual Testing
- Lifetime software updates
- Comprehensive results archiving, presentation and printing as well
as error/trend analysis
|
- Complete on-line operating manual
- Full traceability of results to test set hardware, software
and calibration data
- Test Templates allows the test set to be rapidly set up
|
Features - Hardware
|
Discharge Ratings
- 0.1 to 99.9 Amps discharge for 24, 48 and 125 Volt batteries
- 0.1 to 50.0 Amps discharge for 220 Volt batteries
- Discharge time 3 minutes to 10 hours
|
Voltage Monitoring
- Two Voltmeters: Battery Terminal and
uncommitted Voltage
input
- 30, 150, and 300 Volt ranges - auto selected
- 10 second record rate
|
Miscellaneous
- 4 changeover alarm outputs
- Software based calibration
- Comprehensive overload & thermal protection
|
|
|
General
- Universal Supply: 90-260V DC or 45-65Hz AC, 100W, Power Factor
Corrected
- All inputs/outputs are galvanically isolated
from each other and chassis
- Dimensions: 510x270x520mm, Weight: 28.5Kg
- Operating Temperature: 0-45°C
- CE Marked, Tested to EN50081-2 (emissions) & EN50082
(immunity)
|
|
Download BTS demo program
Download the full
brochure - BTSbrochure.PDF (0.6Mb)
 Download FREE PDF
reader
|
|
|
|
|
|
